1. 组网需求
(1) 所有交换机都运行控商品房, 并将整个自治系统划分为 3 个区域.
(2) 其中 switchA 和 switchB 作为 ABR 来转发区域之间的路由.
(3) 配置完成后, 每台交换机都应学到 AS 内的到所有网段的路由.
2. 实验拓扑图如下
3. 配置步骤如下
配置步骤
(1) 配置各接口的 IP 地址
例 SwitchB:
- <H3C>
- sys [H3C]hostname SwitchB [SwitchB]vlan 100 [SwitchB-vlan100]port g 1/0/10
- [SwitchB-vlan100]quit [SwitchB]vlan 200 [SwitchB-vlan200]port g 1/0/20
- [SwitchB-vlan200]quit [SwitchB]inter vlan 100 [SwitchB-Vlan-interface100]ip
- add 10.1.1.2 24 [SwitchB-Vlan-interface100]quit [SwitchB]inter vlan 200
- [SwitchB-Vlan-interface200]ip add 10.3.1.1 24 [SwitchB-Vlan-interface200]quit
- [SwitchB]
(2) 配置 OSPF 基本配置
配置 Switch A.
- <SwitchA>
- system-view [SwitchA] router id 10.2.1.1 [SwitchA] ospf [SwitchA-ospf-1]
- area 0 [SwitchA-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255 [SwitchA-ospf-1-area-0.0.0.0]
- quit [SwitchA-ospf-1] area 1 [SwitchA-ospf-1-area-0.0.0.1] network 10.2.1.0
- 0.0.0.255 [SwitchA-ospf-1-area-0.0.0.1] quit [SwitchA-ospf-1] quit
配置 Switch B.
- <SwitchB>
- system-view [SwitchB] router id 10.3.1.1 [SwitchB] ospf [SwitchB-ospf-1]
- area 0 [SwitchB-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255 [SwitchB-ospf-1-area-0.0.0.0]
- quit [SwitchB-ospf-1] area 2 [SwitchB-ospf-1-area-0.0.0.2] network 10.3.1.0
- 0.0.0.255 [SwitchB-ospf-1-area-0.0.0.2] quit [SwitchB-ospf-1] quit
配置 Switch C.
- <SwitchC>
- system-view [SwitchC] router id 10.4.1.1 [SwitchC] ospf [SwitchC-ospf-1]
- area 1 [SwitchC-ospf-1-area-0.0.0.1] network 10.2.1.0 0.0.0.255 [SwitchC-ospf-1-area-0.0.0.1]
- network 10.4.1.0 0.0.0.255 [SwitchC-ospf-1-area-0.0.0.1] quit [SwitchC-ospf-1]
- quit
配置 Switch D.
- <SwitchD>
- system-view [SwitchD] router id 10.5.1.1 [SwitchD] ospf [SwitchD-ospf-1]
- area 2 [SwitchD-ospf-1-area-0.0.0.2] network 10.3.1.0 0.0.0.255 [SwitchD-ospf-1-area-0.0.0.2]
- network 10.5.1.0 0.0.0.255 [SwitchD-ospf-1-area-0.0.0.2] quit [SwitchD-ospf-1]
- quit
验证配置
(1) 查看 Switch A 的 OSPF 邻居.
[SwitchA] display ospf peer verbose
结果图如图所示
(2) 查看 Switch A 的 OSPF 路由信息.
[SwitchA] display ospf routing
(3) 查看 Switch D 的 OSPF 路由信息.
[SwitchD] display ospf routing
(4) 在 Switch D 上使用 Ping 进行测试连通性.
[SwitchD] ping 10.4.1.1
来源: http://www.bubuko.com/infodetail-3076427.html