实验名称: 简单的单臂路由的 配置实验 (华为)
实验拓扑:
实验需要:
1, 按图中所示配置设网络备 vlan,IP 地址
2, 能够使各 pc 互相 ping 通.
实验步骤:
1, 配置终端设备:
pc1-pc5 按照拓扑图中所示配置各个 pc 的 ip 地址.
网关配置为 192.168.x.254
2, 配置网络设备
# 配置交换设备 (Lsw1)
1, 创建 vlan
vlan batch 10 20
2, 配置端口模式以及加入的 vlan
- interface g0/0/1
- port link-type access
- port default vlan 10
- interface g0/0/2
- port link-type access
- port default vlan 20
3, 配置交换机之间的互联链路 (trunk)
- interface gi0/0/24
- port link-type trunk
- port trunk allow-pass vlan 10 20
- # 配置交换设备 (Lsw2)
1, 创建 vlan
vlan batch 10 20
2, 配置端口模式以及加入的 vlan
- interface g0/0/1
- port link-type access
- port default vlan 10
- interface g0/0/2
- port link-type access
- port default vlan 20
3, 配置交换机之间的互联链路 (trunk)
- interface gi0/0/24
- port link-type trunk
- port trunk allow-pass vlan 10 20
- interface gi0/0/23
- port link-type trunk
- port trunk allow-pass vlan all
- #配置路由器设备 (AR1)
1, 配置子端口, 并定义对应的 vlan
- interface g0/0/1.1
- dot1q termination vid 10
- ip address 192.168.10.254 255.255.255.0
- arp broadcast enable
- interface g0/0/1.2
- dot1q termination vid 20
- ip address 192.168.20.254 255.255.255.0
- arp broadcast enable
2, 配置连接 pc 端的端口
- interface g0/0/0
- ip address 192.168.30.254 255.255.255.0
验证:
![](http://i2.51cto.com/images/blog/201811/21/a79963be03dbcb4dcd9fe03c019f2a05.jpg?x-oss-process=image/watermark,size_16,text_QDUxQ1RP5Y2a5a6i,color_FFFFFF,t_100,g_se,x_10,y_10,shadow_90,type_ZmFuZ3poZW5naGVpdGk=)
pc1 ping 通了 pc5
来源: http://www.bubuko.com/infodetail-2856123.html