我们经常会碰到这样的问题, 用 telnet/ssh 登录了远程的 Linux 服务器, 运行了一些耗时较长的任务, 结果却由于网络的不稳定导致任务中途失败. 如何让命令提交后不受本地关闭终端窗口 / 网络断开连接的干扰呢? 下面举了一些例子, 您可以针对不同的场景选择不同的方式来处理这个问题.
nohup/setsid/&
场景:
如果只是临时有一个命令需要长时间运行, 什么方法能最简便的保证它在后台稳定运行呢?
hangup 名称的来由
在 Unix 的早期版本中, 每个终端都会通过 modem 和系统通讯. 当用户 logout 时, modem 就会挂断 (hang up) 电话. 同理, 当 modem 断开连接时, 就会给终端发送 hangup 信号来通知其关闭所有子进程.
解决方法:
我们知道, 当用户注销 (logout) 或者网络断开时, 终端会收到 HUP(hangup)信号从而关闭其所有子进程. 因此, 我们的解决办法就有两种途径: 要么让进程忽略 HUP 信号, 要么让进程运行在新的会话里从而成为不属于此终端的子进程.
1. nohup
nohup 无疑是我们首先想到的办法. 顾名思义, nohup 的用途就是让提交的命令忽略 hangup 信号. 让我们先来看一下 nohup 的帮助信息:
- NOHUP(1) User Commands NOHUP(1)
- NAME
nohup - run a command immune to hangups, with output to a non-tty
SYNOPSIS
nohup COMMAND [ARG]...
- nohup OPTION
- DESCRIPTION
Run COMMAND, ignoring hangup signals.
- --help display this help and exit
- --version
- output version information and exit
可见, nohup 的使用是十分方便的, 只需在要处理的命令前加上 nohup 即可, 标准输出和标准错误缺省会被重定向到 nohup.out 文件中. 一般我们可在结尾加上 "&" 来将命令同时放入后台运行, 也可用 ">filename 2>&1" 来更改缺省的重定向文件名.
nohup 示例
- [root@pvcent107 ~]# nohup ping www.ibm.com &
- [1] 3059
nohup: appending output to `nohup.out'
[root@pvcent107 ~]# ps -ef |grep 3059
root 3059 984 0 21:06 pts/3 00:00:00 ping www.ibm.com
- root 3067 984 0 21:06 pts/3 00:00:00 grep 3059
- [root@pvcent107 ~]#
- 2.setsid
nohup 无疑能通过忽略 HUP 信号来使我们的进程避免中途被中断, 但如果我们换个角度思考, 如果我们的进程不属于接受 HUP 信号的终端的子进程, 那么自然也就不会受到 HUP 信号的影响了. setsid 就能帮助我们做到这一点. 让我们先来看一下 setsid 的帮助信息:
SETSID(8) Linux Programmer's Manual SETSID(8)
- NAME
- setsid - run a program in a new session
- SYNOPSIS
- setsid program [ arg ... ]
- DESCRIPTION
setsid runs a program in a new session.
可见 setsid 的使用也是非常方便的, 也只需在要处理的命令前加上 setsid 即可.
setsid 示例
- [root@pvcent107 ~]# setsid ping www.ibm.com
- [root@pvcent107 ~]# ps -ef |grep www.ibm.com
root 31094 1 0 07:28 ? 00:00:00 ping www.ibm.com
root 31102 29217 0 07:29 pts/4 00:00:00 grep www.ibm.com
[root@pvcent107 ~]#
值得注意的是, 上例中我们的进程 ID(PID)为 31094, 而它的父 ID(PPID)为 1(即为 init 进程 ID), 并不是当前终端的进程 ID. 请将此例与 nohup 例 https://www.ibm.com/developerworks/cn/linux/l-cn-nohup/index.html#nohup 中的父 ID 做比较.
3.&
这里还有一个关于 subshell 的小技巧. 我们知道, 将一个或多个命名包含在 "()" 中就能让这些命令在子 shell 中运行中, 从而扩展出很多有趣的功能, 我们现在要讨论的就是其中之一.
当我们将 "&" 也放入 "()" 内之后, 我们就会发现所提交的作业并不在作业列表中, 也就是说, 是无法通过 jobs 来查看的. 让我们来看看为什么这样就能躲过 HUP 信号的影响吧.
subshell 示例
- [root@pvcent107 ~]# (ping www.ibm.com &)
- [root@pvcent107 ~]# ps -ef |grep www.ibm.com
root 16270 1 0 14:13 pts/4 00:00:00 ping www.ibm.com
root 16278 15362 0 14:13 pts/4 00:00:00 grep www.ibm.com
[root@pvcent107 ~]#
从上例中可以看出, 新提交的进程的父 ID(PPID)为 1(init 进程的 PID), 并不是当前终端的进程 ID. 因此并不属于当前终端的子进程, 从而也就不会受到当前终端的 HUP 信号的影响了.
disown
场景:
我们已经知道, 如果事先在命令前加上 nohup 或者 setsid 就可以避免 HUP 信号的影响. 但是如果我们未加任何处理就已经提交了命令, 该如何补救才能让它避免 HUP 信号的影响呢?
解决方法:
这时想加 nohup 或者 setsid 已经为时已晚, 只能通过作业调度和 disown 来解决这个问题了. 让我们来看一下 disown 的帮助信息:
- disown [-ar] [-h] [jobspec ...]
- Without options, each jobspec is removed from the table of
- active jobs. If the -h option is given, each jobspec is not
removed from the table, but is marked so that SIGHUP is not
sent to the job if the shell receives a SIGHUP. If no jobspec
is present, and neither the -a nor the -r option is supplied,
- the current job is used. If no jobspec is supplied, the -a
- option means to remove or mark all jobs; the -r option without
a jobspec argument restricts operation to running jobs. The
return value is 0 unless a jobspec does not specify a valid
job.
可以看出, 我们可以用如下方式来达成我们的目的.
灵活运用 CTRL-z
在我们的日常工作中, 我们可以用 CTRL-z 来将当前进程挂起到后台暂停运行, 执行一些别的操作, 然后再用 fg 来将挂起的进程重新放回前台 (也可用 bg 来将挂起的进程放在后台) 继续运行. 这样我们就可以在一个终端内灵活切换运行多个任务, 这一点在调试代码时尤为有用. 因为将代码编辑器挂起到后台再重新放回时, 光标定位仍然停留在上次挂起时的位置, 避免了重新定位的麻烦.
用 disown -h jobspec 来使某个作业忽略 HUP 信号.
用 disown -ah 来使所有的作业都忽略 HUP 信号.
用 disown -rh 来使正在运行的作业忽略 HUP 信号.
需要注意的是, 当使用过 disown 之后, 会将把目标作业从作业列表中移除, 我们将不能再使用 jobs 来查看它, 但是依然能够用 ps -ef 查找到它.
但是还有一个问题, 这种方法的操作对象是作业, 如果我们在运行命令时在结尾加了 "&" 来使它成为一个作业并在后台运行, 那么就万事大吉了, 我们可以通过 jobs 命令来得到所有作业的列表. 但是如果并没有把当前命令作为作业来运行, 如何才能得到它的作业号呢? 答案就是用 CTRL-z(按住 Ctrl 键的同时按住 z 键)了!
CTRL-z 的用途就是将当前进程挂起(Suspend), 然后我们就可以用 jobs 命令来查询它的作业号, 再用 bg jobspec 来将它放入后台并继续运行. 需要注意的是, 如果挂起会影响当前进程的运行结果, 请慎用此方法.
disown 示例 1(如果提交命令时已经用 "&" 将命令放入后台运行, 则可以直接使用 "disown")
- [root@pvcent107 build]# cp -r testLargeFile largeFile &
- [1] 4825
- [root@pvcent107 build]# jobs
[1]+ Running cp -i -r testLargeFile largeFile &
- [root@pvcent107 build]# disown -h %1
- [root@pvcent107 build]# ps -ef |grep largeFile
root 4825 968 1 09:46 pts/4 00:00:00 cp -i -r testLargeFile largeFile
- root 4853 968 0 09:46 pts/4 00:00:00 grep largeFile
- [root@pvcent107 build]# logout
disown 示例 2(如果提交命令时未使用 "&" 将命令放入后台运行, 可使用 CTRL-z 和 "bg" 将其放入后台, 再使用 "disown")
[root@pvcent107 build]# cp -r testLargeFile largeFile2
[1]+ Stopped cp -i -r testLargeFile largeFile2
[root@pvcent107 build]# bg %1
[1]+ cp -i -r testLargeFile largeFile2 &
[root@pvcent107 build]# jobs
[1]+ Running cp -i -r testLargeFile largeFile2 &
- [root@pvcent107 build]# disown -h %1
- [root@pvcent107 build]# ps -ef |grep largeFile2
root 5790 5577 1 10:04 pts/3 00:00:00 cp -i -r testLargeFile largeFile2
- root 5824 5577 0 10:05 pts/3 00:00:00 grep largeFile2
- [root@pvcent107 build]#
- screen
场景:
我们已经知道了如何让进程免受 HUP 信号的影响, 但是如果有大量这种命令需要在稳定的后台里运行, 如何避免对每条命令都做这样的操作呢?
解决方法:
此时最方便的方法就是 screen 了. 简单的说, screen 提供了 ANSI/VT100 的终端模拟器, 使它能够在一个真实终端下运行多个全屏的伪终端. screen 的参数很多, 具有很强大的功能, 我们在此仅介绍其常用功能以及简要分析一下为什么使用 screen 能够避免 HUP 信号的影响. 我们先看一下 screen 的帮助信息:
- SCREEN(1) SCREEN(1)
- NAME
screen - screen manager with VT100/ANSI terminal emulation
- SYNOPSIS
- screen [ -options ] [ cmd [ args ] ]
- screen -r [[pid.]tty[.host]]
- screen -r sessionowner/[[pid.]tty[.host]]
- DESCRIPTION
Screen is a full-screen window manager that multiplexes a physical
terminal between several processes (typically interactive shells).
Each virtual terminal provides the functions of a DEC VT100 terminal
and, in addition, several control functions from the ISO 6429 (ECMA
48, ANSI X3.64) and ISO 2022 standards (e.g. insert/delete line and
support for multiple character sets). There is a scrollback history
buffer for each virtual terminal and a copy-and-paste mechanism that
allows moving text regions between windows.
使用 screen 很方便, 有以下几个常用选项:
用
screen -dmS session name
来建立一个处于断开模式下的会话(并指定其会话名).
用 screen -list 来列出所有会话.
用
screen -r session name
来重新连接指定会话.
用快捷键 CTRL-a d 来暂时断开当前会话.
screen 示例
- [root@pvcent107 ~]# screen -dmS Urumchi
- [root@pvcent107 ~]# screen -list
- There is a screen on:
- 12842.Urumchi (Detached)
- 1 Socket in /tmp/screens/S-root.
- [root@pvcent107 ~]# screen -r Urumchi
当我们用 "-r" 连接到 screen 会话后, 我们就可以在这个伪终端里面为所欲为, 再也不用担心 HUP 信号会对我们的进程造成影响, 也不用给每个命令前都加上 "nohup" 或者 "setsid" 了. 这是为什么呢? 让我来看一下下面两个例子吧.
1. 未使用 screen 时新进程的进程树
- [root@pvcent107 ~]# ping www.google.com &
- [1] 9499
- [root@pvcent107 ~]# pstree -H 9499
- initXvnc
- acpid
- atd
- 2*[sendmail]
- sshdsshdbashpstree
- sshdbashping
我们可以看出, 未使用 screen 时我们所处的 bash 是 sshd 的子进程, 当 ssh 断开连接时, HUP 信号自然会影响到它下面的所有子进程(包括我们新建立的 ping 进程).
2. 使用了 screen 后新进程的进程树
- [root@pvcent107 ~]# screen -r Urumchi
- [root@pvcent107 ~]# ping www.ibm.com &
- [1] 9488
- [root@pvcent107 ~]# pstree -H 9488
- initXvnc
- acpid
- atd
- screenbashping
- 2*[sendmail]
而使用了 screen 后就不同了, 此时 bash 是 screen 的子进程, 而 screen 是 init(PID 为 1)的子进程. 那么当 ssh 断开连接时, HUP 信号自然不会影响到 screen 下面的子进程了.
总结
现在几种方法已经介绍完毕, 我们可以根据不同的场景来选择不同的方案. nohup/setsid 无疑是临时需要时最方便的方法, disown 能帮助我们来事后补救当前已经在运行了的作业, 而 screen 则是在大批量操作时不二的选择了.
来源: http://www.bubuko.com/infodetail-2650020.html