一, 常用的 NTP 服务器 IP
- 210.72.145.44 (国家授时中心服务器 IP 地址)
- 202.112.10.36 # 1.cn.pool.ntp.org
- 59.124.196.83 # 0.asia.pool.ntp.org
s2m.time.edu.cn 北京大学
s2c.time.edu.cn 北京邮电大学
二, 搭建 NTP 服务器
NTP 服务端配置步骤如下
1, 安装 ntp
yum -y install ntp
2, 开机启动
chkconfig ntpd on
chkconfig --list ntpd
3, 先手工同步下时间
ntpdate -u 210.112.145.44
4, 配置 ntpd 主配置文件 ntp.conf
vim /etc/ntp.conf 增加如下内容
- # 允许内网其他机器同步时间
- restrict 192.168.239.0 mask 255.255.255.0 nomodify notrap
- # 中国这边最活跃的时间服务器 : http://www.pool.ntp.org/zone/cn
- server 210.72.145.44 perfer # 中国国家受时中心
- server 202.112.10.36 # 1.cn.pool.ntp.org
- server 59.124.196.83 # 0.asia.pool.ntp.org
- # allow update time by the upper server
- # 允许上层时间服务器主动修改本机时间
- restrict 210.72.145.44 nomodify notrap noquery
- restrict 202.112.10.36 nomodify notrap noquery
- restrict 59.124.196.83 nomodify notrap noquery
- # 外部时间服务器不可用时, 以本地时间作为时间服务
- server 127.127.1.0 # local clock
- fudge 127.127.1.0 stratum 10
5, 开启 ntp 服务, 并查看商品
- /etc/init.d/ntpd start
- netstat -atunlp | grep ntp
6, 查看时间同步状态 ntpstat (表示本地时间服务器已经和外网的 NTP 服务同步上了)
- [root@localhost ~]# ntpstat
- synchronised to NTP server (202.112.10.36) at stratum 6
- time correct to within 1171 ms
- polling server every 64 s
三, NTP 客户端配置步骤
只需要建立一条计划任务就 OK
crontab -e 加入如下两条内容. (每分钟同步一次)
- #client ntp sync to ntp server 192.168.239.133
- /usr/sbin/ntpdate -u 192.168.239.133>/dev/null 2>&1
来源: http://www.bubuko.com/infodetail-2552315.html