实验目标
? 掌握静态路由的配置方法和技巧;
? 掌握通过静态路由方式实现网络的连通性;
? 熟悉广域网线缆的链接方式;
实验背景
学校有新旧两个校区, 每个校区是一个独立的局域网, 为了使新旧校区能够正常相互通
讯, 共享资源每个校区出口利用一台路由器进行连接, 两台路由器间学校申请了一条 2M
的 DDN 专线进行相连, 要求做适当配置实现两个校区的正常相互访问
技术原理
? 路由器属于网络层设备, 能够根据 IP 包头的信息, 选择一条最佳路径, 将数据包
转发出去实现不同网段的主机之间的互相访问路由器是根据路由表进行选路和
转发的而路由表里就是由一条条路由信息组成
? 生成路由表主要有两种方法: 手工配置和动态配置, 即静态路由协议配置和动态路
由协议配置
? 静态路由是指有网络管理员手工配置的路由信息
? 静态路由除了具有简单高效可靠的优点外, 它的另一个好处是网络安全保密性
高
? 缺省路由可以看做是静态路由的一种特殊情况当数据在查找路由表时, 没有找到
和目标相匹配的路由表项时, 为数据指定路由
实验步骤
? 新建 packet tracer 拓扑图
? (1) 在路由器 R1 R2 上配置接口的 IP 地址和 R1 串口上的时钟频率;
? (2) 查看路由器生成的直连路由;
? (3) 在路由器 R1 R2 上配置静态路由;
? (4) 验证 R1 R2 上的静态路由配置;
? (5) 将 PC1 PC2 主机默认网关分别设置为路由器接口 fa 0/0 的 IP 地址;
? (6) PC1 PC2 主机之间可以相互通信;
实验设备
pc 2 台; Router-PT 可扩展路由 2 台 (Switch_2811 无 V.35 线接口); Switch_2960 2 台;
DCE 串口线; 直连线; 交叉线
配置如下:
- PC1
- IP: 192.168.1.2
- Submask: 255.255.255.0
- Gateway: 192.168.1.1
- PC2
- IP: 192.168.2.2
- Submask: 255.255.255.0
- Gateway: 192.168.2.1
路由器配置:
- Router>en
- Router#conf t
- Router(config)#hostname R1
- R1(config)#
- R1(config)#int f0/0
- R1(config-if)#no shut
- R1(config-if)#ip address 192.168.1.1 255.255.255.0
- R1(config-if)#int s1/0
- R1(config-if)#no shut
- R1(config-if)#ip address 192.168.3.1 255.255.255.0
- R1(config-if)#clock rate 64000
- R1(config-if)#end
- R1#
- Router>
- Router>en
- Router#conf t
- Router(config)#hostname R2
- R2(config)#int f0/0
- R2(config-if)#ip address 192.168.2.1 255.255.255.0
- R2(config-if)#no shut
- R2(config-if)#int s1/0
- R2(config-if)#no shut
- R2(config-if)#ip address 192.168.3.2 255.255.255.0
- R2(config-if)#
- R1#
- R1#conf t
- R1(config)#ip route 192.168.2.0 255.255.255.0 192.168.3.2
- R1(config)#end
- R1#show ip route
- Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
- i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
- candidate default, U - per-user static route, o - ODR
- P - periodic downloaded static route
- Gateway of last resort is not set
- C 192.168.1.0/24 is directly connected, FastEthernet0/0
- S 192.168.2.0/24 [1/0] via 192.168.3.2
- C 192.168.3.0/24 is directly connected, Serial1/0
- R1#
- R2#conf t
- R2(config)#ip route 192.168.1.0 255.255.255.0 192.168.3.1
- R2(config)#end
- R2#show ip route
- Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
- D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
- N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
- E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
- i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
- candidate default, U - per-user static route, o - ODR
- P - periodic downloaded static route
- Gateway of last resort is not set
- S 192.168.1.0/24 [1/0] via 192.168.3.1
- C 192.168.2.0/24 is directly connected, FastEthernet0/0
- C 192.168.3.0/24 is directly connected, Serial1/0
实验验证:
- PC>ping 192.168.2.2
- Pinging 192.168.2.2 with 32 bytes of data:
- Request timed out.
- Reply from 192.168.2.2: bytes=32 time=1ms TTL=126
- Reply from 192.168.2.2: bytes=32 time=1ms TTL=126
- Reply from 192.168.2.2: bytes=32 time=3ms TTL=126
- Ping statistics for 192.168.2.2:
- Packets: Sent = 4, Received = 3, Lost = 1 (25% loss),
- Approximate round trip times in milli-seconds:
- Minimum = 1ms, Maximum = 3ms, Average = 1ms
实验完成!
来源: http://www.bubuko.com/infodetail-2507787.html