这里有新鲜出炉的Mysql教程,程序狗速度看过来!
MySQL是一个开放源码的小型关联式数据库管理系统,开发者为瑞典MySQL AB公司。MySQL被广泛地应用在Internet上的中小型网站中。由于其体积小、速度快、总体拥有成本低,尤其是开放源码这一特点,许多中小型网站为了降低网站总体拥有成本而选择了MySQL作为网站数据库。
这篇文章主要介绍了CentOS7服务器中apache、php7以及mysql5.7的安装配置代码,需要的朋友可以参考下
CentOS7服务器中apache、php7以及mysql5.7的配置代码如下所示:
- yum upgrade
- yum install net-tools
安装apache
- 关闭SELinux
- 编辑器打开 etc/selinux/config 文件,找到 SELINUX=enforcing 字段,将其改成 SELINUX=disabled ,并重启设备。
- yum -y install httpd mod_ssl
- 配置防火墙
- firewall-cmd --permanent --add-port=80/tcp
- firewall-cmd --permanent --add-port=443/tcp
- firewall-cmd --reload
- 开机启动
- systemctl start httpd
- systemctl enable httpd
- 终端输入如下指令检查httpd的运行状态
- sudo systemctl status httpd
安装PHP7
- 添加源
- rpm -Uvh https://dl.fedoraproject.org/pub/epel/epel-release-latest-7.noarch.rpm
- rpm -Uvh https://mirror.webtatic.com/yum/el7/webtatic-release.rpm
- 安装
- yum install php70w
安装mysql5.7
- 1.安装wget
- yum -y install wget
- 2.安装源
- wget https://dev.mysql.com/get/mysql57-community-release-el7-8.noarch.rpm
- rpm -ivh mysql57-community-release-el7-8.noarch.rpm
- 3.安装mysql
- yum install mysql-server
- 4.启动mysql服务
- systemctl start mysqld
- 5.查看MySQL的启动状态
- systemctl status mysqld
- 6.开机启动
- systemctl enable mysqld
- systemctl daemon-reload
- 7.修改root本地登录密码
- 查找mysql生成的随机密码
- grep 'temporary password' /var/log/mysqld.log
- mysql -uroot -p
- 修改密码,注意:mysql5.7默认安装了密码安全检查插件(validate_password),默认密码检查策略要求密码必须包含:大小写字母、数字和特殊符号,并且长度不能少于8位。否则会提示ERROR 1819 (HY000): Your password does not satisfy the current policy requirements错误
- ALTER USER 'root'@'localhost' IDENTIFIED BY 'MyNewPass4!';
- 8.配置默认编码为utf8
- 修改/etc/my.cnf配置文件,在[mysqld]下添加编码配置
- [mysqld]
- character_set_server=utf8
- init_connect='SET NAMES utf8'
- 9.配置mysql远程连接
- mysql -uroot -p
- use mysql;
- Grant all on *.* to 'root'@'%' identified by 'root用户的密码' with grant option;
- flush privileges;
- 然后用以下命令查看哪些用户和host可以访问,%代表任意ip地址
- select user,host from user;
- 防火墙添加3306端口
- firewall-cmd --zone=public --add-port=3306/tcp --permanent
- firewall-cmd --reload
- 10.mysql忘记密码
- 1.修改MySQL的配置文件(默认为/etc/my.cnf),在[mysqld]下添加一行skip-grant-tables
- 2.service mysqld restart后,即可直接用mysql进入
- 3.mysql> update mysql.user set authentication_string=password('123qwe') where user='root' and Host = 'localhost';
- mysql> flush privileges;
- mysql> quit;
- 将/etc/my.cnf文件还原,重新启动mysql:service mysql restart,这个时候可以使用mysql -u root -p'123qwe'进入了
- mysql>SET PASSWORD = PASSWORD('newpasswd'); 设置新密码
总结
以上所述是小编给大家介绍的CentOS7服务器中apache、php7以及mysql5.7的安装配置代码,希望对大家有所帮助,如果大家有任何疑问请给我留言,小编会及时回复大家的。在此也非常感谢大家对PHPERZ网站的支持!
来源: http://www.phperz.com/article/17/1031/351992.html