- using System;
- using System.Collections.Generic;
- using System.Text;
- namespace MacPrinter
- {
- public class ZPL_Command
- {
- /// (^EF)<summary>
- /// 清除设定 (已包含起始结束命令)
- /// </summary>
- /// <returns></returns>
- public string _CmdEraseSetup()
- {
- string st = "^XA^EF^FS^XZ";
- return st.ToUpper();
- }
- /// <summary>
- ///(^XA) ZPL命令开始
- /// </summary>
- /// <returns></returns>
- public string _CmdStart()
- {
- return "^XA".ToUpper();
- }
- /// <summary>
- ///(^XZ) ZPL命令结尾
- /// </summary>
- /// <returns></returns>
- public string _CmdEnd()
- {
- return "^XZ".ToUpper();
- }
- /// <summary>
- /// (^FS)一个字段的结束(结束一行命令)
- /// </summary>
- /// <returns></returns>
- public string _CmdLineEnd()
- {
- return "^FS".ToUpper();
- }
- /// <summary>
- ///(^A)字体设定{^Af,o,h,w}
- /// </summary>
- /// <param name="DesiredFont">(f)需要选择的字体默认为O(A-Z,1-9)</param>
- /// <param name="FontOrientation">(o)字体是否旋转默认N(R旋转90°,I旋转180°,B旋转270°,)</param>
- /// <param name="FontHeight">(h)设定字体高度以点计算默认为15(10-1500)</param>
- /// <param name="FontWidth">(w)设定字体宽度以点计算默认为12(10-1500)</param>
- /// <returns></returns>
- public string _SetFont(string DesiredFont, string FontOrientation, int FontHeight, int FontWidth)
- {
- string _a = string.Format("^A{0}{1},{2},{3}", DesiredFont, FontOrientation, FontHeight, FontWidth);
- return _a.ToUpper();
- }
- /// <summary>
- /// (^A)字体设定{^Af,o,h,w}
- /// </summary>
- /// <param name="DesiredFont">(f)需要选择的字体默认为O(A-Z,1-9)</param>
- /// <param name="FontHeight">(h)设定字体高度以点计算默认为15(10-1500)</param>
- /// <param name="FontWidth">(w)设定字体宽度以点计算默认为12(10-1500)</param>
- /// <returns></returns>
- public string _SetFont(string DesiredFont, int FontHeight, int FontWidth)
- {
- return this._SetFont(DesiredFont, "N", FontHeight, FontWidth);
- }
- /// <summary>
- /// (^[email protected])调用字体名字设定字体{^[email protected],h,w,n}
- /// </summary>
- /// <param name="FontOrientation">字体是否旋转默认N(R旋转90°,I旋转180°,B旋转270°,)</param>
- /// <param name="FontHeight">设定字体高度以点计算默认为15(10-1500)</param>
- /// <param name="FontWidth">设定字体宽度以点计算默认为12(10-1500)</param>
- /// <param name="FontName">Font Name(Cyrillic.FNT)</param>
- /// <returns></returns>
- public string _SetFont(string FontOrientation, int FontHeight, int FontWidth, string FontName)
- {
- return string.Format("^[email protected]{0},{1},{2},{3}", FontOrientation, FontHeight, FontWidth, FontName);
- }
- /// <summary>
- /// (^B1o,e,h,f,g)
- /// </summary>
- /// <returns></returns>
- public string _SetCode11()
- {
- return "";
- }
- /// <summary>
- /// (^B3)Code39码(^B3o,e,h,f,g)
- /// </summary>
- /// <param name="Orientation">Orientation:
- ///Default value: Current ^FW setting
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees;</param>
- /// <param name="e">Mod-43 Check Digit:
- ///Default value: N = No;
- ///Other value: Y = Yes</param>
- /// <param name="Height">Bar Code Height:
- /// Default value: Value set by ^BY ;
- ///Other values: 1 dot to 9999 dots
- /// </param>
- /// <param name="f">Print Interpretation Line
- ///Default value: Y = Yes;
- ///Other value: N = No</param>
- /// <param name="g">Print Interpretation Line Above Code
- ///Default value: N = No ;
- ///Other value: Y = Yes</param>
- /// <returns></returns>
- public string _SetCode39(string Orientation, string e, int Height, string f, string g)
- {
- return string.Format("^B3{0},{1},{2},{3},{4}", Orientation, e, Height, f, g).ToUpper();
- }
- /// <summary>
- /// (^B4)Code49码(^B4o,h,f,m)
- /// </summary>
- /// <param name="Orientation">
- /// Orientation
- ///Default value: Current ^FW value
- ///(^FW defaults to N = Normal at power-up);
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees;</param>
- /// <param name="Height">Height Multiplier of Individual Rows
- ///Defined: This number, multiplied by the module,;
- ///equals the height of the individual rows in dots.;
- ///Default value: Value set by ^BY;
- ///Other values: 1 to height of label.;
- ///NOTE: 1 is not a recommended value.</param>
- /// <param name="f">Print Interpretation Line
- ///Default value: N = No line printed.
- ///Other values:
- ///A = Print interpretation line above code.;
- ///B = Print interpretation line below code.</param>
- /// <param name="m">Starting Mode
- ///Default value: A = Automatic Mode. Printer determines
- ///starting mode by analyzing field data.;
- ///Other values:
- ///0 = Regular Alphanumeric Mode;
- ///1 = Multiple Read Alphanumeric;
- ///2 = Regular Numeric Mode;
- ///3 = Group Alphanumeric Mode;
- ///4 = Regular Alphanumeric Shift 1;
- ///5 = Regular Alphanumeric Shift 2;</param>
- /// <returns></returns>
- public string _SetCode49(string Orientation, int Height, string f, string m)
- {
- return string.Format("^B4{0},{1},{2},{3}", Orientation, Height, f, m).ToUpper();
- }
- /// <summary>
- /// (^B7)PDF417 Bar Code(^B7o,h,s,c,r,t)
- /// </summary>
- /// <param name="o">Orientation Default value: Current ^FW value
- ///
- ///(^FW defaults to N = Normal at power-up);
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees;</param>
- /// <param name="h">Bar Code Height for Individual Rows
- ///(This number, multiplied by the module, equals the
- ///height of the individual rows in dots.)
- ///Default value: Value set by ^BY;
- ///Other values: 1 dot to height of label.;
- ///NOTE: 1 is not a recommended value.</param>
- /// <param name="s">Security Level
- ///Determines the number of error detection and correction
- ///code words to be generated for the symbol.
- ///Default level provides only error detection (no correction).
- ///Increasing the security level adds increasing
- ///levels of error correction. (Increases symbol size.)
- ///Default value: 0 = Error detection only;
- ///Other values: 1 to 8.;
- ///Error detection plus correction.</param>
- /// <param name="c" >Number of Data Columns to Encode
- ///User can specify number of codeword columns giving
- ///control over the width of the symbol.;
- ///Default value: 1:2 row/column aspect ratio.;
- ///Other values: 1 to 30;</param>
- /// <param name="r">Number of Rows to Encode
- ///User can specify number of symbol rows giving control
- ///over the height of the symbol.;
- ///Default value: 1:2 row/column aspect ratio.;
- ///Other values: 3 to 90;;
- ///Example: With no row or column values entered, 72
- ///codewords would be encoded into a symbol of 6 columns
- ///and 12 rows. (Depending on codewords, aspect ratio
- ///will not always be exact.)</param>
- /// <param name="t">Truncate Right Row Indicators and Stop Pattern
- ///Default value: N = No truncation
- ///Print right row indicators and stop pattern.
- ///Other value: Y = Yes perform truncation.</param>
- /// <returns></returns>
- public string _SetCodeBDF417(string o, int h, int s, int c, int r, string t)
- {
- return string.Format("^B7{0},{1},{2},{3},{4},{5}", o, h, s, c, r, t).ToUpper();
- }
- //
- //
- /// <summary>
- /// (^B8)EAN-8 Bar Code(^B8o,h,f,g)
- /// </summary>
- /// <param name="o">Orientation
- ///Default value: Current ^FW value
- ///(^FW defaults to N = Normal at power-up);
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees;</param>
- /// <param name="h">Bar Code Height
- ///Default value: Value set by ^BY;
- ///Other values: 1 dot to 9999 dots</param>
- /// <param name="f">Print Interpretation Line
- ///Default value: Y = Yes;
- ///Other value: N = No</param>
- /// <param name="g">Print Interpretation Line Above Code
- ///Default value: N = No;
- ///Other value: Y = Yes</param>
- /// <returns></returns>
- public string _SetCodeEAN8(string o, int h, string f, string g)
- {
- return string.Format("^B8{0},{1},{2},{3}", o, h, f, g).ToUpper();
- }
- /// <summary>
- /// (^B9)UPC-E Bar Code(^B9o,h,f,g,e)
- /// </summary>
- /// <param name="o">Orientation
- ///Default value: Current ^FW setting;
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees</param>
- /// <param name="h">Bar Code Height
- ///Default value: Value set by ^BY;
- ///Other values: 1 dot to 9999 dots</param>
- /// <param name="f">Print Interpretation Line
- ///Default value: Y = Yes;
- ///Other value: N = No</param>
- /// <param name="g">Print Interpretation Line Above Code
- ///Default value: N = No;
- ///Other value: Y = Yes</param>
- /// <param name="e">Print Check Digit
- ///Default value: Y = Yes,;
- ///Other value: N = No</param>
- /// <returns></returns>
- public string _SetCodeUPC_E(string o, int h, string f, string g, string e)
- {
- return string.Format("^B9{0},{1},{2},{3},{4}", o, h, f, g, e).ToUpper();
- }
- /// <summary>
- /// (^BA)Code 93 Bar Code(^BAo,h,f,g,e)
- /// </summary>
- /// <param name="o">Orientation
- ///Default value: Current ^FW setting;
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees</param>
- /// <param name="h">Bar Code Height
- ///Default value: Value set by ^BY;
- ///Other values: 1 dot to 9999 dots</param>
- /// <param name="f">Print Interpretation Line
- ///Default value: Y = Yes;
- ///Other value: N = No</param>
- /// <param name="g">Print Interpretation Line Above Code
- ///Default value: N = No;
- ///Other value: Y = Yes</param>
- /// <param name="e">Print Check Digit
- ///Default value: Y = Yes,;
- ///Other value: N = No</param>
- /// <returns></returns>
- public string _SetCode93(string o, int h, string f, string g, string e)
- {
- return string.Format("^BA{0},{1},{2},{3},{4}", o, h, f, g, e).ToUpper();
- }
- /// <summary>
- /// (^BC)Code 128 Bar Code(Subsets A, B, and C)(^BCo,h,f,g,e,m)
- /// </summary>
- /// <param name="o">Orientation
- ///Default value: Current ^FW setting;
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees</param>
- /// <param name="h">Bar Code Height
- ///Default value: Value set by ^BY;
- ///Other values: 1 dot to 9999 dots</param>
- /// <param name="f">Print Interpretation Line
- ///Default value: Y = Yes
- ///Other value: N = No</param>
- /// <param name="g">Print Interpretation Line Above Code
- ///Default value: N = No;
- ///Other value: Y = Yes</param>
- /// <param name="e">UCC Check Digit
- ///Default value: N = No;;
- ///Other value: Y = Yes</param>
- /// <param name="m">Mode
- ///Default value: N = No mode selected;;
- ///Other value: U = UCC Case Mode;;
- ///(^FD or ^SN statement must contain 19
- ///numeric digits (it can also contain valid alpha
- ///characters). Subset C using FNC1 values is
- ///automatically selected.</param>
- /// <returns></returns>
- public string _SetCode128(string o, int h, string f, string g, string e, string m)
- {
- return string.Format("^BC{0},{1},{2},{3},{4},{5}", o, h, f, g, e, m);
- }
- /// <summary>
- /// (^BC)Code 128 Bar Code(Subsets A, B, and C)(^BCo,h,f,g,e,m)
- /// </summary>
- /// <param name="o">Orientation
- ///Default value: Current ^FW setting;
- ///Other values:
- ///N = Normal;
- ///R = Rotated, 90 degrees clockwise;
- ///I = Inverted, 180 degrees;
- ///B = Read from Bottom Up, 270 degrees</param>
- /// <param name="h">Bar Code Height
- ///Default value: Value set by ^BY;
- ///Other values: 1 dot to 9999 dots</param>
- /// <param name="f">Print Interpretation Line
- ///Default value: Y = Yes
- ///Other value: N = No</param>
- /// <param name="g">Print Interpretation Line Above Code
- ///Default value: N = No;
- ///Other value: Y = Yes</param>
- /// <param name="e">UCC Check Digit
- ///Default value: N = No;;
- ///Other value: Y = Yes</param>
- /// <returns></returns>
- public string _SetCode128(string o, int h, string f, string g, string e)
- {
- return string.Format("^BC{0},{1},{2},{3},{4}", o, h, f, g, e);
- }
- /// <summary>
- /// (^BY) Change Bar Code Default Parameters(条码字段默认参数设置,用来改变窄元素(窄条或窄空)的宽度模块)
- /// </summary>
- /// <param name="w">模块(窄条)宽 (开机初始化值:2点 可接受的数值:1-10点) Module (Narrow Bar) Width (Initial power -up value: 2 dots ,Acceptable values: 1-10 dots)</param>
- /// <param name="r">宽条与窄条的比例 (开机初始化值:3.0 可接受的数值:2.0到3.0,0.1的增量(对固定比例的条码无效))Wide Bar to Narrow Bar Width Ratio(Initial power-up ratio: 3.0 ,Acceptable ratios: From 2.0 to 3.0 in .1 increments.)</param>
- /// <param name="h">条码高度 开机初始化值:10点可接受的数值:1点到标签高度(Height of Bars(Initial Power-up value: 10 dots, Acceptable values: 1 dot to height of label)</param>
- /// <returns></returns>
- public string _changeBarCodeDefault(int w, int r, int h)
- {
- string _by = string.Format("^BY{0},{1},{2}", w, r, h);
- return _by.ToUpper();
- }
- /// <summary>
- /// (^BY) Change Bar Code Default Parameters(条码字段默认参数设置,用来改变窄元素(窄条或窄空)的宽度模块)
- /// </summary>
- /// <param name="w">模块(窄条)宽 (开机初始化值:2点 可接受的数值:1-10点) Module (Narrow Bar) Width (Initial power -up value: 2 dots ,Acceptable values: 1-10 dots)</param>
- /// <param name="r">宽条与窄条的比例 (开机初始化值:3.0 可接受的数值:2.0到3.0,0.1的增量(对固定比例的条码无效))Wide Bar to Narrow Bar Width Ratio(Initial power-up ratio: 3.0 ,Acceptable ratios: From 2.0 to 3.0 in .1 increments.)</param>
- /// <returns></returns>
- public string _changeBarCodeDefault(int w, string r)
- {
- string _by = string.Format("^BY{0},{1}", w, r);
- return _by.ToUpper();
- }
- /// <summary>
- /// (^LR) Reverse Print All Fields
- /// </summary>
- /// <param name="reverse">(y)是否以黑底白字打印{Y or N}</param>
- /// <returns></returns>
- public string _SetLableReverse(string reverse)
- {
- return string.Format("^LR{0}", reverse);
- }
- /// <summary>
- /// (^LL)设定Lable长度
- /// </summary>
- /// <param name="iLength">Number of Dots Along Y-Axis{Default value:1225 for Stripe ; 1244 for Xi printers}</param>
- /// <returns></returns>
- public string _SetLableLength(int iLength)
- {
- return string.Format("^LL{0}", iLength);
- }
- /// <summary>
- /// (^LS)移动Lable
- /// </summary>
- /// <param name="shiftValue">Shift Left Value of dots(Acceptable values: 0 to 9999 dots)</param>
- /// <returns></returns>
- public string _SetLableShift(int shiftValue)
- {
- return string.Format("^LS{0}", shiftValue);
- }
- /// <summary>
- /// (^LH) 设置Lable起点以及顶端距离(以点计算),如超出范围将抛出错误
- /// </summary>
- /// <param name="x">起点的X位置</param>
- /// <param name="y">起点的Y位置</param>
- /// <param name="width">实际Lable纸张的宽度(以点计算)</param>
- /// <param name="height">实际Lable纸张的宽度(以点计算)</param>
- /// <returns></returns>
- public string _SetLableHomeAndTop(int x, int y, int width, int height)
- {
- if (y < width && x < height)
- {
- string _lh_lt = string.Format("^LH{0},{1}^LT{1}", x, y);
- return _lh_lt.ToUpper();
- }
- else
- {
- throw new Exception("超出范围");
- }
- }
- /// <summary>
- /// (^LH)设定Lable的起点
- /// </summary>
- /// <param name="x">起点的X位置</param>
- /// <param name="y">起点的Y位置</param>
- /// <param name="width">实际Lable纸张的宽度(以点计算)</param>
- /// <param name="height">实际Lable纸张的宽度(以点计算)</param>
- /// <returns></returns>
- public string _SetLableHome(int x, int y)
- {
- return string.Format("^LH{0},{1}", x, y);
- }
- /// <summary>
- ///(^LT) Lable距离顶端边的距离(以点计算)
- /// </summary>
- /// <param name="iTop"></param>
- /// <returns></returns>
- public string _SetLableTop(int iTop)
- {
- return string.Format("^LT{0}", iTop);
- }
- /// <summary>
- /// (^DF)下载字体
- /// </summary>
- /// <param name="FileName">字体文件名称包含扩展名(STOREFMT.ZPL)</param>
- /// <returns></returns>
- public string _SetDownLoadFont(string FileName)
- {
- string _df = string.Format("^DF{0}", FileName);
- return _df.ToUpper();
- }
- /// <summary>
- ///(^MD) 设定打印字体容度
- /// </summary>
- /// <param name="darknessVale">容度值默认15(-30至+30)</param>
- /// <returns></returns>
- public string _SetMediaDarkness(int darknessVale)
- {
- string _md = string.Format("^MD{0}", darknessVale);
- return _md.ToUpper();
- }
- /// <summary>
- /// (^ML) Maximum Label Length
- /// </summary>
- /// <param name="iLength">Maximum Label Length in Dot Rows(Default value:Last permanently saved value)</param>
- /// <returns></returns>
- public string _SetMaxLableLength(int iLength)
- {
- return string.Format("^ML{0}", iLength);
- }
- /// <summary>
- /// (^MM)Print Mode
- /// </summary>
- /// <param name="strDesiredMode">
- /// Desired Mode
- /// Default value:
- ///T = Tear Off ;
- ///Other Values:
- ///P = Peel Off (not available on S-300 printers)
- ///R = Rewind (Instruction ignored if parameter
- ///missing or incorrect.)
- ///A = Applicator
- /// </param>
- /// <param name="strPrePeelSelect">Pre-Peel Select(Y or N)</param>
- /// <returns></returns>
- public string _SetPrintMode(string strDesiredMode, string strPrePeelSelect)
- {
- return string.Format("^MM{0},{1}", strDesiredMode, strPrePeelSelect);
- }
- /// <summary>
- /// (^MN) Set Media Tracking
- /// </summary>
- /// <param name="strTrack">Media Being Used
- ///N = Continuous Media ;
- ///Y = Non-Continuous Media Web Sensing</param>
- /// <returns></returns>
- public string _SetMedieTracking(string strTrack)
- {
- return string.Format("^MN{0}", strTrack);
- }
- /// <summary>
- /// (^MU)Set Mode Units
- /// </summary>
- /// <param name="unitsType">units type
- /// Default: D = Dots
- ///I = Inches
- ///M = Millimeters</param>
- /// <returns></returns>
- public string _SetModeUnits(string unitsType)
- {
- return string.Format("^MU{0}", unitsType);
- }
- /// <summary>
- ///(^PR _^PW) 设定打印速度以及打印的宽度
- /// </summary>
- /// <param name="PrintSpeed">打印速度值默认3(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec.)</param>
- /// <param name="SlewSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
- /// <param name="BackfeedSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
- /// <param name="PrintWidth">打印宽度(根据Lable纸而定)</param>
- /// <returns></returns>
- public string _SetPrintRateAndWidth(int PrintSpeed, int SlewSpeed, int BackfeedSpeed, int PrintWidth)
- {
- string _pr_pw = string.Format("^PR{0},{1},{2}^PW{3}", PrintSpeed, SlewSpeed, BackfeedSpeed, PrintWidth);
- return _pr_pw.ToUpper();
- }
- /// <summary>
- ///(^PR) 设定打印速度以及打印的宽度
- /// </summary>
- /// <param name="PrintSpeed">打印速度值默认3(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec.)</param>
- /// <param name="SlewSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
- /// <param name="BackfeedSpeed">Default value: Speed D(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec)</param>
- /// <returns></returns>
- public string _SetPrintRate(int PrintSpeed, int SlewSpeed, int BackfeedSpeed)
- {
- return string.Format("^PR{0},{1},{2}", PrintSpeed, SlewSpeed, BackfeedSpeed);
- }
- /// <summary>
- /// (^PR)设置打印速度
- /// </summary>
- /// <param name="PrintSpeed">打印速度:
- /// Print Speed
- ///Default value: Speed A
- ///Acceptable values :
- ///A or 2 50.8 mm/sec. (2 inches/sec.)
- ///B or 3 76.2 mm/sec. (3 inches/sec.)
- ///C or 4 101.6 mm/sec. (4 inches/sec.)
- ///5 127 mm/sec. (5 inches/sec.)
- ///D or 6 152.4 mm/sec. (6 inches/sec.)
- ///E or 8 203.2 mm/sec. (8 inches/sec.)
- /// </param>
- /// <returns></returns>
- public string _SetPrintRate(int PrintSpeed)
- {
- return string.Format("^PR{0}", PrintSpeed);
- }
- /// <summary>
- /// (^PW)设置打印范围(宽度)
- /// </summary>
- /// <param name="printWidth">打印宽度</param>
- /// <returns></returns>
- public string _SetPrintWidth(int printWidth)
- {
- return string.Format("^PW{0}", printWidth);
- }
- /// <summary>
- /// (^PR_^PW) 设定打印速度以及打印的宽度
- /// </summary>
- /// <param name="PrintSpeed">打印速度值默认3(A or 2 50.8 mm/sec,B or 3 76.2 mm/sec,C or 4 101.6 mm/sec,5 127 mm/sec,D or 6 152.4 mm/sec,E or 8 203.2 mm/sec.)</param>
- /// <param name="PrintWidth">打印宽度(根据Lable纸而定)</param>
- /// <returns></returns>
- public string _SetPrintRateAndWidth(int PrintSpeed, int PrintWidth)
- {
- return this._SetPrintRateAndWidth(PrintSpeed, 6, 6, PrintWidth);
- }
- /// <summary>
- /// (^PR_^PW) 设定打印的宽度打印速度使用默认值
- /// </summary>
- /// <param name="PrintWidth"></param>
- /// <returns></returns>
- public string _SetPrintRateAndWidth(int PrintWidth)
- {
- return this._SetPrintRateAndWidth(3, 6, 6, PrintWidth);
- }
- /// <summary>
- /// (^FO)设置字段的位置,相对于由^LH命令指定的标签原点
- /// </summary>
- /// <param name="x">Number of Dots along X-axis(Default value: = 0,Acceptable values: 0 - 9999)</param>
- /// <param name="y">Number of Dots along Y-axis(Default value: = 0,Acceptable values: 0 - 9999)</param>
- /// <returns></returns>
- public string _SetFieldOrigin(int x, int y)
- {
- string _fo = string.Format("^FO{0},{1}", x, y);
- return _fo.ToUpper();
- }
- /// <summary>
- /// Code 128 Bar Code (^BC)
- /// </summary>
- /// <param name="o">字体方向 //[N = 正常 (Normal), R = 顺时针旋转90度(Roated), I = 顺时针旋转180度(Inverted), B = 顺时针旋转270度 (Bottom)]</param>
- /// <param name="h">条码高度 // [默认值:由^BY设置 其他值:1到9999点]</param>
- /// <param name="f">打印注释行 //[ 默认值: Y = 打印(Yes)其他值:N = 不打印(No]</param>
- /// <param name="g">将注释行打印在条码上方 //[ 默认值: N = 不打印在条码上方其他值: Y = 打印在条码上方]</param>
- /// <param name="e"> 打印UCC校验位 // 默认值:Y = 打印(Yes)其他值:N = 不打印(No)</param>
- /// <param name="m">= 模式 //默认值:N = 不选择模式, 其他值:U = UCC匹配模式></param>
- /// <returns></returns>
- public string _BCCode128(string o, int h, string f, string g, string e, string m)
- {
- string _bc = string.Format("^BC{0},{1},{2},{3},{4},{5}", o, h, f, g, e, m);
- return _bc.ToUpper();
- }
- /// <summary>
- /// Code 128 Bar Code(^BC)
- /// </summary>
- /// <param name="o">字体方向 //[N = 正常 (Normal), R = 顺时针旋转90度(Roated), I = 顺时针旋转180度(Inverted), B = 顺时针旋转270度 (Bottom)]</param>
- /// <param name="h">条码高度 // [默认值:由^BY设置 其他值:1到9999点]</param>
- /// <param name="f">打印注释行 //[ 默认值: Y = 打印(Yes)其他值:N = 不打印(No]</param>
- /// <param name="g">将注释行打印在条码上方 //[ 默认值: N = 不打印在条码上方其他值: Y = 打印在条码上方]</param>
- /// <param name="e"> 打印UCC校验位 // 默认值:Y = 打印(Yes)其他值:N = 不打印(No)</param>
- /// <returns></returns>
- public string _BCCode128(string o, int h, string f, string g, string e)
- {
- return this._BCCode128(o, h, f, g, e, "N").ToUpper();
- }
- /// <summary>
- /// (^FD) 字段数据
- /// </summary>
- /// <param name="data">打印的数据(字段数据串最多3072字符)</param>
- /// <returns></returns>
- public string _SetFieldData(string data)
- {
- string _fd = string.Format("^FD{0}", data);
- return _fd;
- }
- /// <summary>
- /// (^FH) 字段的十六进制表示(指令允许你在^FD语句里直接输入任何十六进制值。^FH指令必须在每个^FD指令前才能用)在^FD语句里,十六进制标识必须在每个十六进制值前加入(_)。缺省的十六进制标识是下划线(_)。这指令可以用在任何有数据段的指令里,(如^FD,^FV(段变量),和^SN(串行数据)
- /// </summary>
- /// <returns></returns>
- public string _FieldHex()
- {
- return "^FH".ToUpper();
- }
- /// <summary>
- /// (^SN) 连续数据指令
- /// </summary>
- /// <param name="StartingValue">起始值</param>
- /// <param name="IncrementValue">增加/减少值</param>
- /// <param name="LeadingZeros">如需要加引导零. 缺省值:N=不 ;其它值:Y=是</param>
- /// <returns></returns>
- public string _SetSerializationData(string StartingValue, int IncrementValue, string LeadingZeros)
- {
- string _sn = string.Format("^SN{0},{1},{2}", StartingValue, IncrementValue, LeadingZeros.ToUpper());
- return _sn;
- }
- /// <summary>
- ///(^PQ) 打印总数
- /// </summary>
- /// <param name="q">数量(Total Quantity of Labels to Print)</param>
- /// <returns></returns>
- public string _SetPrintQueantity(int q)
- {
- string _pq = string.Format("^PQ{0}", q);
- return _pq.ToUpper();
- }
- /// <summary>
- /// (^PQ)打印总数
- /// {Exemples: ^PQ50,10,1,Y:---- Print a total quantity of 50 labels with one replicate
- ///of each serial number. Print the total quantity in groups of 10, but do
- ///not pause after every group.}
- /// </summary>
- /// <param name="q">Total Quantity of Labels to Print
- /// ;Default value: 1
- ///;Acceptable values: 1 - 99,999,999</param>
- /// <param name="p">Pause (Group) Count;
- /// Default value: 0 = no pause
- ///Acceptable values: 0 - 99,999,999 labels between pauses
- /// </param>
- /// <param name="r">Replicates of Each Serial Number;
- /// Default value: 0 = no replicates
- ///Acceptable values: 0 - 99,999,999 replicates
- /// </param>
- /// <param name="o">Override Pause Count;
- /// Default value: N = No
- ///Other value: Y = Yes
- /// </param>
- /// <returns></returns>
- public string _SetPrintQueantity(int q, int p, int r, string o)
- {
- return string.Format("^PQ{0},{1},{2},{3}", q, p, r, o);
- }
- /// <summary>
- /// (^PM)Print Mirror Image of Lable(
- /// NOTE: The ^PM will remain active unless turned off by ^PMN
- ///instruction or the printer is powered down.)
- /// </summary>
- /// <param name="a">Mirror Print Entire Label
- ///Y = Yes
- ///N = No {I.V.P. = N}</param>
- /// <returns></returns>
- public string _SetMirrorImageLable(string a)
- {
- return string.Format("^PM{0}", a);
- }
- /// <summary>
- /// (^PO)Print Orientation
- /// </summary>
- /// <param name="a">a = Invert 180 Degrees
- ///N = Normal {I.V.P. = N}
- ///I = Invert</param>
- /// <returns></returns>
- public string _SetPrintOrientation(string a)
- {
- return string.Format("^PO{0}", a);
- }
- /// <summary>
- /// (^GF)Graphic Field(图片打印)
- /// </summary>
- /// <param name="CompressionType">
- /// Default:ASCII
- /// Value:
- /// A = ACSII Hex:
- /// This follows the conventional download format
- /// used for all other download commands.
- /// B = Binary:
- /// The data sent to the printer after the c parameter
- /// is strictly binary.
- /// C = Compression Binary :
- /// The data sent after parameter c is in a compressed
- /// binary format. The data is compressed on
- /// the host side using a compression algorithm supplied
- /// by Zebra. The data is then decompressed
- /// and placed directly in the bitmap.
- /// </param>
- /// <param name="BinaryByteCount">
- /// Binary Byte Count
- /// Default:Note-entire command is ignored when not specified
- /// Value:Total number of bytes
- /// Range:1 to 99999
- /// </param>
- /// <param name="GraphicFieldCount">
- /// Graphic Field Count
- /// </param>
- /// <param name=";ByteperRow">
- /// Bytes per Row
- /// </param>
- /// <param name="strData">
- /// Default:None=must be specified
- /// ASCII Hex Data:
- /// </param>
- /// <returns></returns>
- public string _SetGraphicField(string CompressionType, string BinaryByteCount,
- string GraphicFieldCount, string ByteperRow, string strData)
- {
- return string.Format("^GF{0},{1},{2},{3},{4}", CompressionType.ToUpper(), BinaryByteCount, GraphicFieldCount, ByteperRow, strData);
- }
- public string _SetFieldNumber(int i)
- {
- return string.Format("^FN{0}", i);
- }
- public string _SetRecallFormat(string FieldName)
- {
- return string.Format("^XF{0}", FieldName);
- }
- /// <summary>
- ///(^FWr) Set Field Orientation
- /// </summary>
- /// <param name="Orig">Rotate Field
- /// N = Normal {I.V.P. = N}
- /// R = Rotated 90 degrees;
- /// I = Inverted (180 degrees);
- /// B = Bottom Up (270 degrees read from bottom up).
- /// </param>
- /// <returns></returns>
- public string _SetFieldOrientation(string Orig)
- {
- return string.Format("^FW{0}", Orig);
- }
- }
- }
来源: http://www.phpxs.com/code/1004426/