server add ipv working inet6 sta names describes
进入配置文件,配置IP
leafpad /etc/network/interfaces.conf
写入如下格式的内容:
- /etc/network/interfaces
- # This file describes the network interfaces available on your system
- # and how to activate them. For more information, see interfaces(5).
- # The loopback network interface
- auto lo
- iface lo inet loopback
- # The primary network interface
- allow-hotplug eth0
- iface eth0 inet dhcp
- # This is an autoconfigured IPv6 interface
- iface eth0 inet6 auto
- 修改为:
- # This file describes the network interfaces available on your system
- # and how to activate them. For more information, see interfaces(5).
- # The loopback network interface
- auto lo
- iface lo inet loopback
- # The primary network interface
- allow-hotplug eth0
- auto eth0 //增加了该选项,因为使用networking restart时系统启动 auto的网卡,如不加上则启动无反应
- iface eth0 inet static //配置了static 为静态ip
- address 192.168.1.4 //设置ip地址
- netmask 255.255.255.0 //设置掩码
- gateway 192.168.1.1 //设置网关
- # This is an autoconfigured IPv6 interface
- iface eth0 inet6 auto
配置DNS(注:先删除一个之后再新建一个resolv.conf,可防止重启后resolv.conf内容被清空)
leafpad /etc/resolv.conf
- /etc/resolv.conf
- nameserver 202.106.0.20
- nameserver 202.106.46.151
- 修改为:
- nameserver 202.106.0.20
- nameserver 202.106.46.151
- nameserver 8.8.8.8
kali的网络IP设置
来源: http://www.bubuko.com/infodetail-2291304.html