xargs 命令是把接收到的数据重新格式化,再将其作为参数提供给其他命令,下面介绍 xargs 命令的各种使用技巧
一、将多行输入转换成单行输入:
- [root@host1 test]# echo -e "1 2 3 4 5 \n6 7 8 \n9 10 11 12" >example.txt
- [root@host1 test]# cat example.txt
- 1 2 3 4 5
- 6 7 8
- 9 10 11 12
- [root@host1 test]# cat example.txt |xargs
- 1 2 3 4 5 6 7 8 9 10 11 12
将单行输入转换成多行输出:
- [root@host1 test]# cat example.txt | xargs -n 3
- 1 2 3
- 4 5 6
- 7 8 9
- 10 11 12
自定义定界符进行转换(默认的定界符是空格):
- [root@host1 test]# echo "Hello:Hello:Hello:Hello" | xargs -d : -n 2
- Hello Hello
- Hello Hello
二、在脚本中运用:
- [root@host1 test]# cat echo.sh
- #!/bin/bash
- echo $* '^-^'
- 当参数传递给echo.sh后,它会将这些参数打印出来,并且以"^-^"作为结尾:
- [root@host1 test]# echo -e "Tom\nHarry\nJerry\nLucy" > args.txt
- [root@host1 test]# cat args.txt | xargs bash echo.sh
- Tom Harry Jerry Lucy ^-^
- [root@host1 test]# cat args.txt | xargs -n 2 bash echo.sh
- Tom Harry ^-^
- Jerry Lucy ^-^
在上面的例子中,我们把参数源都放入 args.txt 文件,但是除了这些参数,我们还需要一些固定不变的参数,比如:
- [root@host1 test]# bash echo.sh Welcome Tom
- Welcome Tom ^-^
在上述命令执行过程中,Tom 是变量,其余部分为常量,我们可以从 "args.txt" 中提取参数,并按照下面的方式提供给命令:
- [root@host1 test]# bash echo.sh Welcome Tom
- [root@host1 test]# bash echo.sh Welcome Herry
- [root@host1 test]# bash echo.sh Welcome Jerry
- [root@host1 test]# bash echo.sh Welcome Lucy
这时我们需要使用 xargs 中 - I 命令:
- [root@host1 test]# cat args.txt | xargs -I {} bash echo.sh Welcome {}
- Welcome Tom ^-^
- Welcome Harry ^-^
- Welcome Jerry ^-^
- Welcome Lucy ^-^
-I {} 指定替换字符串,对于每一个命令参数,字符串 {} 都会被从 stdin 读取到的参数替换掉,
使用 - I 的时候,命令以循环的方式执行,如果有 4 个参数,那么命令就会连同 {} 一起被执行 4 次,在每一次执行中 {} 都会被替换为相应的参数。
三、结合 find 使用
xargs 和 find 是一对非常好的组合,但是,我们通常是以一种错误的方式运用它们的,比如:
- [root@host1 test]# find . -type f -name "*.txt" -print | xargs rm -f
这样做是有危险的,有时会删除不必删除的文件,如果文件名里包含有空格符 (''), 则 xargs 很可能认为它们是定界符(例如,file text.txt 会被 xargs 误认为 file 和 text.txt)。
如果我们想把 find 的输出作为 xargs 的输入,就必须将 - print0 与 find 结合使用以字符 null('\0')来分隔输出,用 find 找出所有. txt 的文件,然后用 xargs 将这些文件删除:
- [root@host1 test]# find . -type f -name "*.txt" -print0 | xargs -0 rm -f
这样就可以删除所有的. txt 文件了,xargs -0 将 \ 0 作为输入定界符。
四、运用 while 语句和子 shell
- [root@host1 test]# cat files.txt | (while read arg ;do cat $arg;done)
- 这条命令等同于:
- [root@host1 test]# cat files.txt | xargs -I {} cat {}
在 while 循环中,可以将 cat $arg 替换成任意数量的命令,这样我们就可以对同一个参数执行多条命令,也可以不借助管道,将输出传递给其他命令,这个技巧适应于多种问题场景。子 shell 操作符内部的多个命令可作为一个整体来运行。
来源: http://www.cnblogs.com/01-single/p/6882652.html