使用 HISTTIMEFORMAT 显示时间戳
当你从命令行执行 history 命令后,通常只会显示已执行命令的序号和命令本身。如果你想要查看命令历史的时间戳,那么可以执行:
- #export HISTTIMEFORMAT = '%F %T '#history | more 1 2008 - 08 - 05 19 : 02 : 39 service network restart 2 2008 - 08 - 05 19 : 02 : 39 exit 3 2008 - 08 - 05 19 : 02 : 39 id 4 2008 - 08 - 05 19 : 02 : 39 cat / etc / redhat - release
注意:这个功能只能用在当 HISTTIMEFORMAT 这个环境变量被设置之后,之后的那些新执行的 bash 命令才会被打上正确的时间戳。在此之前的所有命令,都将会显示成设置 HISTTIMEFORMAT 变量的时间。[感谢 NightOwl 读者补充]
使用 Ctrl+R 搜索历史
Ctrl+R 是我经常使用的一个快捷键。此快捷键让你对命令历史进行搜索,对于想要重复执行某个命令的时候非常有用。当找到命令后,通常再按回车键就可以执行该命令。如果想对找到的命令进行调整后再执行,则可以按一下左或右方向键。
- # [Press Ctrl + R from the command prompt, which will display the reverse - i - search prompt](reverse - i - search)`red': cat / etc / redhat - release[Note: Press enter when you see your command, which will execute the command from the history]#cat / etc / redhat - release Fedora release 9(Sulphur)
快速重复执行上一条命令
有 4 种方法可以重复执行上一条命令:
从命令历史中执行一个指定的命令
在下面的例子中,如果你想重复执行第 4 条命令,那么可以执行 !4:
- #history | more 1 service network restart 2 exit 3 id 4 cat / etc / redhat - release# ! 4 cat / etc / redhat - release Fedora release 9(Sulphur)
通过指定关键字来执行以前的命令
在下面的例子,输入 !ps 并回车,将执行以 ps 打头的命令:
- # ! ps ps aux | grep yp root 16947 0.0 0.1 36516 1264 ? Sl 13 : 10 0 : 00 ypbind root 17503 0.0 0.0 4124 740 pts / 0 S + 19 : 19 0 : 00 grep yp
使用 HISTSIZE 控制历史命令记录的总行数
将下面两行内容追加到 .bash_profile 文件并重新登录 bash shell,命令历史的记录数将变成 450 条:
- #vi~ / .bash_profile HISTSIZE = 450 HISTFILESIZE = 450
使用 HISTFILE 更改历史文件名称
默认情况下,命令历史存储在 ~/.bashhistory 文件中。添加下列内容到 .bashprofile 文件并重新登录 bash shell,将使用 .commandline_warrior 来存储命令历史:
- #vi~ / .bash_profile HISTFILE = /root/.commandline_warrior
使用 HISTCONTROL 从命令历史中剔除连续重复的条目
在下面的例子中,pwd 命令被连续执行了三次。执行 history 后你会看到三条重复的条目。要剔除这些重复的条目,你可以将 HISTCONTROL 设置为 ignoredups:
- #pwd#pwd#pwd#history | tail - 4 44 pwd 45 pwd 46 pwd[Note that there are three pwd commands in history, after executing pwd 3 times as shown above] 47 history | tail - 4#export HISTCONTROL = ignoredups#pwd#pwd#pwd#history | tail - 3 56 export HISTCONTROL = ignoredups 57 pwd[Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above] 58 history | tail - 4
使用 HISTCONTROL 清除整个命令历史中的重复条目
上例中的 ignoredups 只能剔除连续的重复条目。要清除整个命令历史中的重复条目,可以将 HISTCONTROL 设置成 erasedups:
- #export HISTCONTROL = erasedups#pwd#service httpd stop#history | tail - 3 38 pwd 39 service httpd stop 40 history | tail - 3#ls - ltr#service httpd stop#history | tail - 6 35 export HISTCONTROL = erasedups 36 pwd 37 history | tail - 3 38 ls - ltr 39 service httpd stop[Note that the previous service httpd stop after pwd got erased] 40 history | tail - 6
使用 HISTCONTROL 强制 history 不记住特定的命令
将 HISTCONTROL 设置为 ignorespace,并在不想被记住的命令前面输入一个空格:
- #export HISTCONTROL = ignorespace#ls - ltr#pwd#service httpd stop[Note that there is a space at the beginning of service, to ignore this command from history]#history | tail - 3 67 ls - ltr 68 pwd 69 history | tail - 3
使用 -c 选项清除所有的命令历史
如果你想清除所有的命令历史,可以执行:
- #history - c
命令替换
在下面的例子里,!!:$ 将为当前的命令获得上一条命令的参数:
- #ls anaconda - ks.cfg anaconda - ks.cfg#vi !! :$ vi anaconda - ks.cfg
补充:使用 !$ 可以达到同样的效果,而且更简单。[感谢 wanzigunzi 读者补充]
下例中,!^ 从上一条命令获得第一项参数:
- #cp anaconda - ks.cfg anaconda - ks.cfg.bak anaconda - ks.cfg#vi - 5 ! ^vi anaconda - ks.cfg
为特定的命令替换指定的参数
在下面的例子,!cp:2 从命令历史中搜索以 cp 开头的命令,并获取它的第二项参数:
- #cp~ / longname.txt / really / a / very / long / path / long - filename.txt#ls - l ! cp: 2 ls - l / really / a / very / long / path / long - filename.txt
下例里,!cp:$ 获取 cp 命令的最后一项参数:
- #ls - l ! cp: $ ls - l / really / a / very / long / path / long - filename.txt
使用 HISTSIZE 禁用 history
如果你想禁用 history,可以将 HISTSIZE 设置为 0:
- #export HISTSIZE = 0#history# [Note that history did not display anything]
使用 HISTIGNORE 忽略历史中的特定命令
下面的例子,将忽略 pwd、ls、ls -ltr 等命令:
- #export HISTIGNORE = "pwd: ls: ls - ltr: "#pwd#ls#ls - ltr#service httpd stop#history | tail - 3 79 export HISTIGNORE = "pwd: ls: ls - ltr: "80 service httpd stop 81 history[Note that history did not record pwd, ls and ls - ltr]
来源: http://lib.csdn.net/article/linux/39177